How to install Any Windows OS Shahbaz Sharif’s Dell N4050

How to install Windows Operating System on Shahbaz Sharif’s Dell N4050.

Install Windows on Shahbaz Sharif Laptop

To install Windows Operating System on Shahbaz Sharif’s Laptops follow these steps.

1. Go to Aptio Bios Setup by Pressing F2
2. In Bios Setup Move to Advanced.
3. Then move to the “SATA OPERATION “
4. Change ACHI to ATA. In “SATA OPERATION“
5. Then you will see a Warning select Yes.
6. Then click on Exit and select “save  changes and Reset”

After this insert your Windows Xp or Windows 7 CD to install the Windows On Shahbaz Sharif Youth Scheme laptop.

Read More

How to "Delete administrator Password" without any software

How to "Delete administrator Password" without any software

Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.

Method 2

Step 1. Put your hard disk of your computer in any other pc .Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).Step 3. Then open that drive in which the victim’s window(or your window) is installed.Step 4. Go to location windows->system32->configStep 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)

Read More

Passowrd Protected USB

How To Make Passowrd Protected USB Flash Drives

 Losing a USB drive or other mobile devices in which you store your valuable information can cost you a lot if accessed by any unauthorized person. The same may happen if it falls into the wrong hands. So, is there a way by which you can avoid such panic? Of course yes! The Kashu System Design of Japan has come up with a unique product – KASHU USB Flash Security!

 

 

What is KASHU USB Flash Security?

Well, KASHU USB Flash Security is a program, a free utility for password protecting USB keys and other sensitive data stored in it.

How does it help

The KASHU USB Flash Security allows users to generate a password necessary for accessing the protected data on the USB key. The data is encrypted using powerful AES 256-bit encryption. As mentioned, your valuable information or sensitive data can fall into the wrong hands hence, the program. Also, there are too many security software designed and developed for computer but very few for mobile devices.

How to use KASHU USB Flash Security program

Before you start, download the program and install it on your Windows-based computer. During the process, you will be greeted by a wizard that will guide you through the steps required to install the Flash Security. Simply follow it. When done, a small icon will be visible on your computer screen as a shortcut.

Now, to install the USB Flash security on your USB drive, connect it to your computer and run the flash security program using the shortcut icon. When you run the program you will observe that the program window displays USB drive as a tab. Check out the screenshot below.

Select the desired USB drive and click on ‘Install’. Before this action, make sure that you have a backup of all the data as it will be deleted from the target drive when you install Flash Security program on it.
If a warning is displayed, ignore it and hit the ‘OK’ button and proceed further.

Then, enter a password you would like to use for password protecting your USB data and if required, enable the ‘Encryption’ option too. The step is however optional.

When the installation is complete, only two files will be visible under the protected USB drive, i.e. autorun.inf and usbenter.exe. This indicates that your USB drive is now protected. Next time you insert the same USB drive, you should notice a password entry dialog. If you do not see it, just open the USB drive in Explorer and double-click on usbenter.exe.

Also, to access your data you will need to enter the correct password. Once you do it you will be able to view all the content in the normal way. If you would like to lock it again, simply pull the USB flash drive out from your computer.

You can download the Kashu USB Flash Security Free from here. The program is free for personal use, but the freeware version works only on upto  4GB USB’s. However, to use it you will need to install it on your Windows based computer.

Read More

Add a Name to Context Menu

     Note :  Now you will edit a system file so   Don't miss any step 

   So here is a step by step tutorial  to add any desired string in
   Desktop context menu

   First you will need Resource Hacker utility if you haven't
      - Download it from here Resource Hacker  and extract it,

1. Open “%windir%\System32\Shell32.dll” file in Resource hacker and go to:

    Menu -> 215 -> 1033

2. Now add following lines :

MENUITEM "xyz", 33333, MFT_STRING, MFS_GRAYED | MFS_DEFAULT
MENUITEM "      *~-.-~*     ", 33334, MFT_STRING, MFS_ENABLED | MFS_DEFAULT

 Just after this 5 lines :

    215 MENUEX
    LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
    {
    POPUP "", 0, MFT_STRING, MFS_ENABLED, 0
    {

3. Replace "xyz" with any string which you want to add like your Name, e.g.

    MENUITEM "<<   Sherif   >>", 33333, MFT_STRING, MFS_GRAYED | MFS_DEFAULT

    -  I add Tow lines in my Menu if you don't wish to add tow lines just add the First line.

4. Click on "Compile Script" button.

5. Save the file and Restart your Windows to see the affect.

Note :- If you are facing problems while saving a file after editing in resource hacker,

                make sure you have disabled WFP (Windows File Protection) service using WFP Patcher, .....
         Download it from this link WFP Patcher and disable WFP .

   Also  if you are getting error "Can't create file...", that means you have edited and saved the same file in the past
        and there is a backup file which needs to be deleted before saving this file again so ..

        - Go to this folder C:\Windows\System32 and open it,

        - Search for a file named "shell32_original.dll and delete this file,

        - Try to save the file in resource hacker once again ,

        - Restart your Windows , ... Enjoy .

Read More

Add image to context menu

Customize Windows XP

1. First download following ZIP file and extract the DLL file from this Link : Download

2. Now register the DLL file ,

   - To do that just type the following command at RUN dialog box or command prompt and press Enter key :

regsvr32 DLL File Location

    i.e., if you saved the DLL file in C:\Image.dll then give following command :

regsvr32 C:\Image.dll

3. That's it. You'll get the image in context menu.

4. To remove the image simply un-register the DLL file by giving following command:

regsvr32 C:\Image.dll /u

Note :

   - If you want to change the image, edit the DLL file using Resource Hacker  and replace the BMP in the file.

   - You can add any BMP file (max size 96x96) i used  96x50.

Read More

Windows Security Hacker

Free Download Windows Security Hacker

Is Tool Say AP Window Ki Security Hack Kar Sakty Ho
Is Say Ap Explorer, System, Network, Dos K All Options Ko Disable And Enable Kar Sakty HO
Is Say Ap Logo Message B Change Kar Sakty Ho
Bus Click Karo Or Wo Option Disable Ya Enable Ho Jaye Ga

For Download Click On Download Button

Read More

Recover the lost administrators password in Windows XP

Recover the lost administrators password in Windows XP../

Slightly more work needed if you lose or forget the Windows XP administrator password.

1.First reboot Windows XP in safe mode by re-starting the computer and pressing F8 repeated as the computer starts up.

2.Then (in safe mode) click Start and then click Run. In the open box type "control userpasswords2" without the quotes - I have just used quotes to differentiate what you have to type.

3.You will now have access to all the user accounts, including the administrators account and will be able to reset the lost password.

4.Just click the administrators user account, and then click Reset Password.

5.You will need to add a new password in the New password and the Confirm new password boxes, and confirm by clicking OK.


All done, you have recovered the lost adminitrators password!

Read More

Hack Administrator Password In Windows 7,Xp And Vista

Hack Administrator Password In Windows 7,Xp And Vista../

Most of us might have experienced a situation when we forget our Windows administrator password.And we are not able to login into windows and access our all necessary data and programs.At that time the only solution that comes into or mind is the installation of fresh copy of windows but this will lead to loss of all data and files that are in the windows drive.There is also another way around using which you don’t need to install a fresh copy of windows and without losing any data.We are providing here the method to reset windows administrator password.This tutorial is only for the purpose of recovering your windows 7,xp or vista password.This should be used only when you forgot or lost your password  and not for hacking into somebody else’s system.Using this hack  you can reset your administrator password or leave it blank.

By using this tutorial

1.You donot need to know anything about your old password.

2.You can unlock locked or disabled accounts.

3.Also edit the registry.

The requirements for using this method are:-

1.Blank CD/floppy disk.

2.Access to Internet.

3.Cd or floppy writer

These requirements can be easily fulfilled by spending 15 minutes in cybercafe or at friends computer

Now here is the step by step tutorial with screenshots on how to hack administrator password in windows 7,vista or xp.

1.Download this small utility.

Click Here To Download

2.You will get an zipped file with ISO image in it.Extract his image using winrar or inbuilt windows software.

3.Put your blank cd in CD-ROM and burn this using Nero or any other image burner software.this is most important step and make sure you burn the ISO image properly.

4.Now put this CD in the system whose password is to be reset.

5.Restart your system and when prompted press enter to boot from the CD.

Note:If you do not get prompt of boot from CD.Then restart you system and press f2 or f6 or f8 or Esc key(anyone of them should work for your system) before the booting of the windows start.Now you will enter into bios and you should change the boot order from here with the first preference as CD-ROM.And again restart your system

6.Now the software will load automatically.It will ask you to select the windows drive and after that provide you with the option of resetting password.

If you have any queries or suggestion do not hesitate to ask.

Read More